vSync412i User Guide
© vSync DVR December 2007
Rev A.
December 2007
Specifications and content are subject to change without notice.
13
3. Getting Started – Setting Up the DVR
The following sections detail the initial setup of the
vSync DVR
.
3-1. Setup – Main Screen
Pressing the
Setup
button prompts a user for entry of a password. The default password is “
1111
”.
Input the default password by pressing the
Up button
4 times, followed by the
SELECT
button.
(We recommend that you protect your DVR system by assigning a new password. Refer to section
3.6 for instructions.)
After assigning a new password, enter it by using the direction arrow keys
(representing 1, 2, 3, & 4) or using the keypad, and then press the SEL button for entering into the Setup
menu shown in Figure 3.1.1. Navigate through the menu icons using the directional
buttons and press the
SELECT
button to enter into sub-category menus.
Figure 3.1.1. Set-up Main Menu Screen
