vSync924 & 1624i User Guide
© vSync DVR December 2007
Rev A.
December 2007
Specifications and content are subject to change without notice.
32
CLIENT ACCESS
Enables/Disables network client access
BANDWIDTH SAVING
Enables/Disables key frame transmission only. This feature is useful
when network bandwidth is not enough for live streaming.
NETWORK TYPE
Type of network
DHCP
Enables/Disables DHCP connection (Dynamic IP address)
IP
Static IP address
GATEWAY
Gateway IP address
SUBNET MASK
Network Subnet Mask address
DNS
DNS server IP address. Valid DNS address is needed for E-mail
transmission and use of DDNS.
DDNS
Domain name for the DDNS server. DDNS is used to resolve dynamic
IP address by assigning a host name to replace the IP address for the
connection.
Send E-mail
Setting this value to “ON” initiates e-mail transmission as follows
through the designated email server. Set to “ON”, and press SEL button
to BEGIN e-mail configuration.
For use with DHCP (Dynamic IP) servers.
On : 1. “ALARM + IP”
2. “ALARM EVENT”
3. “NOTIFY IP”
Off : alarm = alarm event : capture JPG file and emails
1. Alarm + IP
A combination of “Alarm Event” and “Notify IP”
2. Alarm Event
If an event occurs, the DVR sends an email to a specified recipient with
a JPG file of the event.
3. Notify IP
If the DHCP server assigns a new IP address to
vSync DVR,
the DVR
sends an email to a specified recipient with the new IP address..
Mail Address
Input the designated recipient’s address.
Mail Server Name
Enter the name of your SMTP server.
ID
Enter your SMTP server user ID.
Password
Enter your SMTP server password.
Return Address
Warning
: Some incoming e-mail servers block e-mail reception from
unverified return e-mail addresses. Enter a valid e-mail address
associated with the passwords above.
