BGPS-4SI User Guide
© BGPS DVR January 2009
Rev B.
January 2009
Specifications and content are subject to change without notice.
10
the ground reference voltage is identical. This line connects to the Terminal Block
G
input.
ALARM OUT
1 (PGM) connectors for alarm device connection.
Provides simple On/Off switching using relay (not included).
0.5A/125V or 1A/30V. The relay is open when not triggered. The relay can be close
by either a motion or a sensor input, only if enabled in the Recording Setup menu.
POWER
Connector for AC115/220V 12V/5A power adapter.
DIP SWITCHES
VGA
Turn ON for VGA display use.
PAL
Turn ON for PAL, Default is OFF
When you change the position of the switch, reboot the DVR to apply the
new setting. When VGA is on, Video-Out will be disabled!