BGPS-4SI User Guide
© BGPS DVR January 2009
Rev B.
January 2009
Specifications and content are subject to change without notice.
15
Normal, High, or Super.
Video quality is the best on “
SUPER
” setting
RECORDING
Assigns the recording method for a channel:
Disable, Continuous, Motion, Sensor, or Schedule
.
MOTION ZONE
Sets full zone or partial zone.
MOTION SENSITIVITY
Sets motion detection sensitivity for selected channel from 1 to 9.
(9 is the most sensitive setting.)
SENSOR RECORDING
Configures Alarm/Sensor Inputs for triggered recording. There are 4
sensors total. A maximum of 4 sensor/alarm inputs may be
assigned to an individual channel.
PRE RECORD
Enables/disables pre-event/pre-alarm recording.
Pre-event/pre-alarm recording is 5 sec. Only i-frames are recorded.
POST EVENT RECORD
Set the length of time for post-event/post-alarm recording video.
Configurable by channel from 1 to 30 seconds.
SCHEDULE
Configures recording schedules.
Launches new menu as shown in Figure 3.3.3.
3-3-1. Motion Zone set up
By selecting
Partial
Zone
, users can define motion zones within a screen area, as shown in Figure 3.3.1.
Move each rectangular zone around using the four direction key buttons. Press the
SELECT
button to save
the defined rectangular region as part of the motion zone. Upon saving, the defined rectangular blocks will
change color.
Important:
Only selected zones will trigger motion recording.
