background image

USER’S  MANUAL

ANY KEY ANSWER     40 CHANNEL OPERATION

VTECH TELECOMMUNICATIONS LTD.

www. vtechphones. com

Printed in China

MHz

UNIQUE STAND UP DESIGN

9109

Parts Check List:
1.  Handset
2.  Base Unit
3.  Telephone line cord
4.  AC adapter
5.  Battery Pack

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

1. Remove the battery case by pressing on

the

ridged lines and sliding

downward.

2. Unplug the old battery pack and discard.

Don't put the old battery pack in a trash
compactor

or a fire - it could burst.

Service at 1-800-595-9511.  Opening or
removing cabinet parts other than specified
access doors may expose you to
dangerous voltages or other risks. Incorrect
reassembling can cause electric shock
when the appliance is subsequently used.

11. Do not overload wall outlets and extension

cords as this can result in the risk of fire or
electric shock.

12. Unplug this product from the wall outlet:

a) When the power supply cord or plug is

damaged or frayed.

b) If liquid has been spilled into the product.
c) If the product has been exposed to rain

or water.

d) If the product does not operate normally

by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because improper adjustment of other
controls may result in damage and will
often require extensive work to restore
the product to normal operation.

e) If the product has been dropped and

the cabinet has been damaged.

f)

If the product exhibits a distinct change
in performance.

13. Avoid using a telephone (other than a

cordless type) during an electrical storm.
There may be a remote  risk of electric
shock from lighting.

14. Do not use the telephone to report a gas

leak in the vicinity of the leak.

SAVE THESE  INSTRUCTIONS

When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury
to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked

on the product.

3. Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for

example, near a bath tub, kitchen sink, or
swimming pool).

5. Do not place this product on an unstable cart,

stand, or table. The product may fall, causing
serious damage to the product.

6. Slots and openings in the cabinet and the

back or bottom are provided for ventilation.
To protect it from overheating, these openings
must not be blocked by placing the product
on the bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in-installation
where proper ventilation is not provided.

7. This product should be operated only from

the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
dealer or local power company.

8. Do not allow anything to rest on the power

cord. Do not locate this product where the
cord will be abused by persons walking on it.

9. Never push objects of any kind into this

product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.

10. To reduce the risk of electric shock, do not

disassemble this product. If service or repair
work is required, contact VTech Customer

IMPORTANT: Do not dispose of this battery

in household garbage. For
information on recycling or
proper disposal, consult your
local solid waste collection or
disposal organization.

3. Plug the replacement battery cord into

the Handset. Carefully snap the battery
pack in place. Replace the battery cover
by sliding it into place.

4. The new battery pack must be charged

before using your telephone. Place the
handset in the cradle of the base unit to
allow it to charge for 16 hours. Maximum
battery life between charges is more than
5 hours of continuous talk time or 4 days
of standby.

CAUTION: To reduce the Risk of Fire or

Injury to Persons, Read and
Follow these instructions:

1. Use only VTECH battery.

2. Do not open or mutilate the battery.

Released electrolyte is corrosive and
may cause damage to the eyes or skin. It
may be toxic if swallowed.

1

3

2

3. Exercise care in handling batteries in

order not to short the battery with
conducting materials such as rings,
bracelets, and keys.  The battery or
conductor may overheat and cause
burns.

4. Do not dispose of the battery in a fire.

The cell may explode.

REPLACING THE HANDSET BATTERIES

B A T T E R Y   P A C K

H A N D S E T

TELEPHONE LINE
          CORD

BASE UNIT

AC ADAPTER

Summary of Contents for 9109

Page 1: ... place this product on an unstable cart stand or table The product may fall causing serious damage to the product 6 Slots and openings in the cabinet and the back or bottom are provided for ventilation To protect it from overheating these openings must not be blocked by placing the product on the bed sofa rug or other similar surface This product should never be placed near or over a radiator or h...

Page 2: ...e PHONE key to make a call If you are currently on a call pressing PHONE flashes the line This would be used with a feature like call waiting to answer your second call CHAN KEY Pressing the CHAN key when the handset is in use will activate a channel change to the next free channel This is used if you are experiencing noise or interference on the current channel OFF KEY Press the OFF key to exit a...

Page 3: ...ring or local service Call your local telephone company YOU GET NOISE STATIC OR A WEAK SIGNAL EVEN WHEN YOU RE NEAR THE BASE UNIT Place the handset in the base momentarily to re set the security code Then press PHONE to get a line Household appliances plugged into the same circuit as the base unit can sometimes cause interference Try moving the appliance or the base unit to another outlet YOU GET ...

Page 4: ...7 Ship to VTECH ELECTRONICS 200 7671 ALDERBRIDGE WAY RICHMOND BC V6X 1Z9 specific number in your area IC Industry Canada This telephone is registered for use in Canada Notice The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operational and safety requirements Industry Canada does not guarantee t...

Reviews: