77
Appendix
California Energy Commission battery charging
testing instructions
This deskset is set up to comply with the energy-conserving standards right
out of box. These instructions are intended for California Energy Commission
(CEC) compliance testing only. When the CEC battery charging testing mode
is activated, all telephone functions, except backup battery charging, will be
disabled.
To activate the CEC battery charging testing mode:
1. On the CM18445/AM18447 console, press
MENU/
SELECT
.
2. Press or to scroll to
Registration
, then press
MENU/
SELECT
or
/SKIP
.
3. Press or to scroll to
Deregistration
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to choose this deskset, then press
MENU/
SELECT
or
/SKIP
.
5. Press or to scroll to
Yes
, then press
MENU/
SELECT
or
/SKIP
. The
console shows
Deregistering Deskset X
(X represents the extension
number).
The process takes up to 10 seconds to complete. When the deskset
successfully enters the CEC battery charging testing mode, its screen displays
1) Press MENU on Console ->Registration ->Register Ext.
and
2) Press #
on this extension to register.
alternately. You hear a confirmation tone.
If the deskset fails to enter this mode, repeat all the steps above.
To activate the CEC battery charging testing mode:
Register your deskset back to the CM18445/AM18447 console. See
Add and
register a deskset
on page 8 for the instructions.