7
Getting started
Wall mount installation (Optional)
4. Align the wall mounting holes on the back of the deskset with the tabs of the
standard wall plate. Push the deskset down until it clicks securely in place.
5. Plug the large end of the power adapter into an electrical outlet not
controlled by a wall switch.
Wall to tabletop installation
Follow the instructions below to return the deskset from wall installation to
tabletop position.
1. Remove the deskset from the wall. Unplug the power adapter cord from the
electrical outlet.
2. Use a coin to rotate the handset tab 180 degrees.
3. Follow the steps in
Deskset installation
on pages 4-5 to install your deskset
for tabletop use.