21
LCD language
This feature allows you to change the language used for all screen displays.
The language settings on the console and desksets are independent. By
default, the language is set to
English
.
1. When the deskset is idle, press
MENU
/SELECT
.
2. Press or to scroll to
Deskset setup
, then press
MENU/
SELECT
or
/SKIP
.
3. Press or to scroll to
LCD Language
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to select
English
,
Français
or
Español
.
5. Press
MENU/
SELECT
or
/SKIP
to save the setting and return to the
previous menu. To exit without making changes, press
CANCEL
or
/REPEAT
.
Primary line
Use this feature, also known as automatic line selection, to choose which line is
automatically selected each time you make an outside call. If you select
Auto
,
the deskset picks up any available line starting from
Line 1
.
1. When the telephone is idle, press
MENU
/SELECT
.
2. Press or to scroll to
Deskest setup
, then press
MENU/
SELECT
or
/SKIP
.
3. Press or to scroll to
Primary line
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to choose the desired line, then press
MENU/
SELECT
or
/SKIP
.
To exit without making changes, press
CANCEL
.
NOTE:
If you install less than four telephone line cords to the CM18445/AM18447 console
and select
Auto
as your
Primary line
setting, make sure you plug in your telephone line
cords starting from L1/2 jack. Avoid having any unoccupied telephone jack between other
occupied telephone jacks.
Telephone settings
Deskset setup
