38
Telephone operation
Call transfer
You can transfer a call to any other system telephone. Only the recipient
extension can answer the transferred call.
Blind transfer
While on a call, you can transfer a call directly without notifying the
desired extension:
1. Press
TRANSFER
on the deskset
while on a call.
2. Press or to scroll to the desired extension,
then press
MENU/
SELECT
or
/SKIP.
3. The destination device rings. Choose either
option below.
• Answer the call by lifting the corded handset, or
pressing
SPEAKER
.
• You can resume the call by pressing the corresponding flashing line key
(
LINE 1
-
LINE 4
) on the deskset before the destination device answers the
call.
4. Put the corded handset on the deskset or press
SPEAKER
to hang up
.
NOTE:
If the private mailbox of the destination extension is off, the transferred call will only ring on
the destination extension for five times. If the destination extension does not answer within that
period, the transferred call rings back the deskset. If the deskset does not answer the call. the call
ends after it has been in the transfer process for 10 minutes.