3
BATTERY INSTALLATION
1. Make sure the unit is
OFF
.
2. Open the battery cover on the bottom of the unit.
3. Insert 4 new “AA” batteries (UM-3 / LR6) as
illustrated.
DO NOT USE RECHARGEABLE BATTERIES
in this
unit.
4. Close the battery cover.
NOTE:
Remove all pre-installed batteries and the use
of new, alkaline batteries is recommended for
maximum performance.
STANDARD FOR BATTERY TOYS
•
Non-rechargeable batteries are not to be recharged;
•
Rechargeable batteries are to be removed from the toy before being charged;
•
Rechargeable batteries are only to be charged under adult supervision;
•
Different types of batteries or new and used batteries are not to be mixed;
•
Only batteries of the same or equivalent type as recommended are to be used;
•
Batteries are to be inserted with the correct polarity;
•
Exhausted batteries are to be removed from the toy;
•
The supply terminals are not to be short-circuited;
•
The toy is not to be connected to more than recommended number of power supplies.
NOTE:
If the unit suddenly stops working or the sound becomes weak, turn the unit
OFF
for 15 seconds, then turn it back
ON
. If the problem persists it may be caused by
weak batteries. Please install a new set of batteries and try the unit again.