manualshive.com logo in svg

VTech CS6719, User Manual

The VTech CS6719 user manual is available for free download on 88.208.23.73:8080, ensuring that you have all the information needed to utilize this versatile phone. Access this comprehensive manual to fully explore its features, set up your device, and maximize your communication experience without any hassle.

Share
Download
background image

Appendix

62

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device 

under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended 

to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:     

(1) this device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation. Privacy of communications may not be 

ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that 

can be safely absorbed by a user or bystander according to the intended usage of the product. This product 

has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear 

of the user. The telephone base shall be installed and used such that parts of the user’s body other than the 

hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the 

Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment 

contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be 

provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must 

comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone 

cord and modular plug is provided with this product. It is designed to be connected to a compatible modular 

jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an 

RJ14 jack for two lines. See the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your 

telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th 

and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but 

not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your 

telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment 

connected to your telephone line, ensure the connection of this equipment does not disable your alarm 

equipment. If you have questions about what will disable alarm equipment, consult your telephone service 

provider or a qualified installer.

•
•
•
•

FCC, ACTA and IC regulations

Summary of Contents for CS6719







































































Reviews:

No comments

Related manuals for CS6719

D-Link DVG-5121SP Quick Information Manual preview
DVG-5121SP
Brand: D-Link Pages: 56
Samsung SM-A720F Quick Start Manual preview
SM-A720F
Brand: Samsung Pages: 2
Samsung S9 series User Manual preview
S9 series
Brand: Samsung Pages: 28
Samsung SGH-G400 Quick Start Manual preview
SGH-G400
Brand: Samsung Pages: 7
HTC Desire 626S Quick Start Manual preview
Desire 626S
Brand: HTC Pages: 2
Hisense HLTE100E User Manual preview
HLTE100E
Brand: Hisense Pages: 41
Ecom Instruments x.com 501-Ex Operating Instructions Manual preview
x.com 501-Ex
Brand: Ecom Instruments Pages: 64
Archos Access 50S Quick Start Manual preview
Access 50S
Brand: Archos Pages: 45
Barracuda Polycom IP-450 Quick Reference Manual preview
Polycom IP-450
Brand: Barracuda Pages: 4
Uriver SP-115C User Manual preview
SP-115C
Brand: Uriver Pages: 109
VTech LS6405-1E User Manual preview
LS6405-1E
Brand: VTech Pages: 25
Gplus GP810 User Manual preview
GP810
Brand: Gplus Pages: 68
Grandstream Networks GXP2110 Quick Start Manual preview
GXP2110
Brand: Grandstream Networks Pages: 19
Samsung R520_CJ16_MM_111009_F4 User Manual preview
R520_CJ16_MM_111009_F4
Brand: Samsung Pages: 169
Samsung Renown SCH-U810 User Manual preview
Renown SCH-U810
Brand: Samsung Pages: 169
Samsung Reclaim User Manual preview
Reclaim
Brand: Samsung Pages: 222
Samsung Rant SPH-m540 Manual Del Usuario preview
Rant SPH-m540
Brand: Samsung Pages: 231
Samsung S105 - SGH Cell Phone User Manual preview
S105 - SGH Cell Phone
Brand: Samsung Pages: 73

Brands by name

Popular brands

Load more brands