background image

www.vtechphones.com

39

Appendix

Troubleshooting

Problem

Suggestion

I  get  noise,  static,  or 

weak signal even when 

I’m near the telephone 

base. 

  Other electronic products can cause interference with your cordless telephone. Try installing 

your telephone away from these types of electronic devices: wireless routers, radios, radio 

towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, 

kitchen appliances and other cordless telephones.

  Microwave oven operates on the same frequency as your telephone. It is normal to experience 

static on your telephone while the microwave oven is running. Do not install this telephone in 

the same outlet or near the microwave oven.

  If your telephone is plugged in with a modem or surge protector, plug the telephone (or modem/

surge protector) into a different location. If this solves the problem, re-locate your telephone 

or modem farther apart from one another, or use a different surge protector.

  Relocate your telephone base to a higher location. The telephone will likely get better reception 

if not installed in a lower area.

  If the other telephones in your home are having the same problem, the problem is in your wiring 

or local service. Contact your local telephone company (charges may apply).

I  hear  noise  in  the 

handset,  and  none  of 

the  keys  or  buttons 

work.

  Make sure the power cord is plugged in.

I hear other calls while 

using my telephone.

  Disconnect your telephone base from the telephone jack, and plug in a regular telephone. If 

you still hear other calls, the problem is probably in your wiring or local service. Call your local 

telephone company.

Summary of Contents for DE6010





















































Reviews: