16
Adding a corded headset
You can use this deskset hands-free when you install any industry-standard 2.5 mm
corded telephone headset (purchased separately).
Registering the deskset to the base station
The deskset must be registered to the base station in order to make and receive calls.
To register the deskset:
1. Make sure the base station is connected to power.
2. If the deskset is displaying the following registration instructions, go to step 7.
Otherwise, go to step 3.
Press and hold
HANDSET LOCATOR
key at base for
4 seconds
Then, press the
#key at the
Deskset.
3. Press
MENU
on the deskset. The Main Menu appears.
4. Press
q
to scroll to
User settings
and press
SELECT
.
5. Press
q
to scroll to
Registration
and press
SELECT
.
6. With
This Deskset
highlighted, press
SELECT
.
The deskset screen displays instructions.
7. On the base station, press the
HANDSET LOCATOR
button for at least four
seconds, then release the button. Both LEDs on the base station begin to flash
slowly.
8. Press the
#
key on the deskset to begin registration.
The screen displays
Registering Please wait
.
The process takes up to 10 seconds to complete. When registration is complete,
the deskset beeps and displays
Deskset Registered
.
If the deskset fails to register, it displays
Registration failed. Try again
.
Wait for a few seconds and repeat the registration procedure.
Plug a 2.5 mm headset into
the
HEADSET
jack on the side
of the deskset.
