background image

3

12. To reduce the risk of electric shock, do not disassemble this product, but take 

it to an authorized service facility. Opening or removing parts of the handset 

other than specified access doors may expose you to dangerous voltages or 

other risks. Incorrect reassembling can cause electric shock when the product 

is subsequently used.

13. 

Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer servicing to an authorized 

service facility under the following conditions:

A.  When the power supply cord or plug is damaged or frayed.
B.  If liquid has been spilled onto the product.

C.  If the product has been exposed to rain or water.

D.  If the product does not operate normally by following the operating 

 

instructions. Adjust only those controls that are covered by the 

   operation instructions. Improper adjustment of other controls may 

   result in damage and often requires extensive work by an authorized

 

   technician to restore the product to normal operation.
E.  If the product has been dropped and the telephone base and/or 

   handset has been damaged.

F.  If the product exhibits a distinct change in performance.

15. Avoid using a telephone (other than cordless) during an electrical storm. 

There is a remote risk of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under 

certain circumstances, a spark may be created when the adapter is plugged 

into the power outlet, or when the handset is replaced in its cradle. This is a 

common event associated with the closing of any electrical circuit. The user 

should not plug the phone into a power outlet, and should not put a charged 

handset into the cradle, if the phone is located in an environment containing 

concentrations of flammable or flame-supporting gases, unless there is 

adequate ventilation. A spark in such an environment could create a fire or 

explosion. Such environments might include: medical use of oxygen without 

adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; 

etc.); a leak of natural gas; etc.

17. 

Only put the handset of your telephone next to your ear when it is in normal 

talk mode.

18. 

The power adapters are intended to be correctly oriented in a vertical or floor 

mount position. The prongs are not designed to hold the plug in place if it is 

plugged into a ceiling, under-the-table or cabinet outlet.

19. Use only the power cord indicated in this manual. 

Power adapter rating: 6.0 Vdc @ 600 mA

Summary of Contents for Eris Terminal VDP658





















Reviews: