15
Power Requirements
Wireless Mics
Battery: (BT183642/BT283642) 2.4V,400mAh Ni-MH
Conference Phone
Battery: (BT200660) 7.2V 4000mAh Ni-MH
Charging dock power adapter: (CS36M120300FUF)
Input: 100-240V AC 50/60Hz Output: 12V DC @
3000mA
Base Station
Power adapter:
(S003GU0600040) Input: 100-240V AC 50/60 Hz Output:
6.0V DC @ 400mA
(CS3E060040LU) Input: 100-120V AC 60Hz Output:
6.0V DC @ 400mA
Registering the conference phone
To register the conference phone to the base:
1. On the conference phone, press
MENU
and use the keypad to enter the
secret code 7344. The Registration menu appears.
2. Select
This speaker
, then select
with Base station
.
3. Follow the instructions on the conference phone screen. Press
NEXT
to
move through the screens.
a. Connect the conference phone with AC power.
b. Press and hold the LINK key at base for 4 seconds.
c. Press the # key on the conference phone.
4. If prompted, enter the PIN. Default PIN is 1590.
The conference phone displays a message with the results:
“Registration completed” or “Registration failed.”
To deregister the conference phone:
1. On the conference phone, press
MENU
and use the keypad to enter the
secret code 7344. The Registration menu appears.
2. Select
Deregistration
.
3. Select
This speaker
.
4. Select
YES
on the “Deregister this speaker?” screen.
5. Enter the PIN. Default PIN is 1590.
If deregistration is successful, the conference phone displays the message
“<DEVICE_NAME> is deregistered.”
