background image

Configuration File Parameter Guide

119

Back to Contents

VCS752 Administrator and Provisioning Manual

"log" Module: Log Settings

The log settings control system logging activities. System logging may be required for 
troubleshooting purposes. The following logging modes are supported:

Serial/Console—system log output to an external console using a serial/RS-232 
cable

Syslog server—output to a log file on a separate server

Volatile file

The log settings follow the format: log.[element].

All the log settings are included in the general configuration file.

Setting:

log.syslog_enable

Description:

Enables or disables log output to syslog server.

Values:

0 (disabled), 1 (enabled)

Default:

0

Setting:

log.syslog_server_address

Description:

Sets the syslog server IP address.

Values:

Text string (IPv4)

Default:

Blank

Setting:

log.syslog_server_port

Description:

Sets the syslog server port.

Values:

1–65535

Default:

514

Setting:

log.syslog_level

Description:

Sets the log level. The higher the level, the larger the debug output.
5—all
4—debug
3—info
2—warning
1—error
0—critical

Values:

0–5

Default:

2

Summary of Contents for ErisStation VCS752





















































































































































Reviews: