Configuration Using the Phone Menus
25
VCS752 Administrator and Provisioning Manual
To set static IP for the VCS752:
1.
From the
Network setting
menu, press
or
to highlight
Set static IP
, and then
press
SELECT
.
If DHCP is disabled, the
Set static IP
menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the
Network setting
menu.
2.
On the
Set static IP
menu, enter the static IP address. Use the dial pad and the
soft key to enter characters. Press
or
to advance to the next character.
3.
Press
and enter the Subnet Mask. Use the dial pad and the
soft key to
enter characters. Press
or
to advance to the next character.
4.
Press
and enter the Gateway. Use the dial pad and the
Add dot
soft key to enter
characters. Press
or
to advance to the next character.
5.
Press
.
To set the VLAN ID for the VCS752:
1.
From the
Network setting
menu, press
or
to highlight
VLAN ID
, and then
press
SELECT
.
2.
On the
VLAN ID
menu, press
or
to enable or disable the WAN VLan.
3.
Press
and enter the WAN VID. Use the dial pad and the
soft key to enter
characters. The valid range is 0 to 4095.
4.
Press
.
Add dot
Add dot
Save
Backspc
Save
