Introducing the VCS752
13
VCS752 Administrator and Provisioning Manual
VCS752 Configuration Methods
You can configure the VCS752 using one of the following methods:
From the VCS752 itself, using the menus. The VCS752 menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the VCS752 menus include network
settings, account settings, and provisioning settings. See
. Many of the settings accessible on the VCS752 are
most useful for end users. Through the menu, they can customize the screen
appearance, sounds, and manage calls. For more information, see the VCS752
User Guide.
The Web User Interface, or WebUI, which you access using your Internet browser.
See
. The browser-based interface is easy to
navigate and best suited to configuring a large number of VCS752 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, and set up
provisioning, which will allow you to automatically and remotely update the
VCS752 after initial configuration.
Provisioning using configuration files. Working with configuration files allows you to
configure the device at regular intervals. There are several methods available to
enable the VCS752 to locate and upload the configuration file. For example, you
can enable the VCS752, when it starts up or reboots, to check for the presence of
a configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the VCS752 automatically downloads the file and
applies the new settings. For more information, see
