Using the WebUI
53
VSP716A Administrator and Provisioning Manual
Jitter Buffer
Keep Alive
Setting
Description
Enable fixed jitter buffer mode.
If Fixed is selected, enter the fixed jitter delay.
Enable adaptive jitter buffer mode.
If Adaptive is selected, enter the normal or “target” delay.
Enter the minimum delay.
Enter the maximum delay. This time, in milliseconds, must
be at least twice the minimum delay.
Setting
Description
Enable SIP keep alive in service of NAT traversal and as a
heartbeat mechanism to audit the SIP server health status.
Once enabled, OPTIONS traffic should be sent whenever
the account is registered. OPTIONS traffic will occur
periodically according to the keep-alive interval.
Set the interval at which the OPTIONS for the keep-alive
mechanism are sent.
Enable the phone to ignore keep-alive failure, if the failure
can trigger account re-registration and re-subscription (and
active calls are dropped).
