Introducing the VSP716A
12
VSP716A Administrator and Provisioning Manual
Programmable Feature Keys
The table below lists the default settings for the programmable feature keys (PFKs). The
key assignments on your phone may be different. Some keys may be programmed as
Quick Dial keys, for example. You can assign functions to programmable keys using the
phone menu (
Main Menu > User Settings > Programmable keys
), using the WebUI, or
via provisioning and the configuration file.
For more information about assigning functions to programmable keys using the phone
menu, see the User Guide.
To assign functions to programmable keys using the WebUI, see
.
For the programmable key configuration file parameters, see
Feature Key Settings” on page 171
.
Other possible programmable key settings
Call Forward No Answer—Turns Call Forward No Answer (CFNA) on and off.
When CFNA is on, unanswered incoming calls are forwarded to another number
after a specified delay.
Call Forward Busy—Turns Call Forward Busy (CFB) on and off. When CFB is on,
incoming calls are forwarded to another number when the line is busy.
Quick Dial
BLF—Busy lamp field keys let you monitor activity at other phones. The key LED
indicates call status.
ACD—If enabled as an ACD (Automatic Call Distribution) key, the user can press
the key to display the ACD State menu on the phone. The user can select an ACD
state from the menu, and the key LED will indicate the selected state. See the User
Guide for more information about using the ACD State menu. The ACD feature is
compatible with Broadsoft's Broadworks Call Center Application.
Page—If this feature is enabled, press the Page key to call one or a group of
phones. You can configure pages to be automatically answered. See
.
Multicast page—Press the Multicast page key to page all phones in a pre-defined
paging zone. See
.
Table 2. Programmable key default settings
Key Number Setting
1
Line—Account 1
2
Line—Account 1
