Configuration File Parameter Guide
141
VSP716A Administrator and Provisioning Manual
MAC-specific configuration file settings
Setting:
network.pc_port.enable
Description:
Enable or disable the PC port to operate in hub/switch mode (depending
on the Enable PC Port Mirroring setting).
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
network.pc_port.mirroring.enable
Description:
When the PC port is enabled, enable PC Port Mirroring to set the port to
operate in hub mode (network traffic on the WAN port is reflected in the
PC port). When Port Mirroring is not enabled, the port operates in switch
mode.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
network.ip.mode
Description:
Sets the IPv4 network mode.
Values:
disable, dhcp, static, pppoe
Default:
dhcp
Setting:
network.ip.static_ip_addr
Description:
Sets a static IP address for the network.
Values:
Text string (IPv4)
Default:
Blank
Setting:
network.ip.subnet_mask
Description:
Sets the subnet mask for the network.
Values:
Text string (IPv4)
Default:
Blank
Setting:
network.ip.gateway_addr
Description:
Sets the Gateway IP address.
Values:
Text string (IPv4)
Default:
Blank
Setting:
network.ip.dns1
Description:
Sets the primary DNS server IP address.
Values:
Text string (IPv4)
Default:
Blank
