Introducing the VSP716A
20
VSP716A Administrator and Provisioning Manual
Customizing Soft Keys
Using the configuration file, you can select which soft keys can appear on the Idle screen,
the Active Call screen, the Held Call screen, and the Live Dial screen. You can also specify
the position of each soft key. See
“softkey Module: Custom Soft Key Settings” on page 199
Some soft keys appear only under certain conditions. For example, the Line soft key on the
Idle screen appears only if there is more than one registered SIP account. When a
"conditional" soft key is not visible, the soft key's position is left empty.
Soft key levels with no soft keys will not be shown if there are multiple soft key levels (as
indicated by the
and
icons). Any soft key level where all soft keys are invisible will be
dynamically skipped when the user navigates through the available levels. On the
VSP716A, a soft key level consists of three soft keys (populated or blank) in a row.
Table 4 shows the soft key options available for each screen. Each screen can have a
maximum of nine soft keys.
Custom soft key configuration file settings
You cannot edit soft key text. The configuration file parameters allow you to only
select and position the soft keys for each screen.
Table 4. Custom Soft Keys
Screen
Available Soft Keys
Soft Key Text
Idle
Blank
Directory
Directory
Call Log
Call Log
Redial
Redial
Message
Message
Do Not Disturb
DND
Call Forward
CallFwd
Call Forward All
FwdAll
Call Forward No Answer
CFNA
Call Forward Busy
FwdBusy
Intercom
Intercom
Retrieve Parked Call
Retrieve
Call Return
CallBack
Group Call Pickup
GrpPickup
Direct Call Pickup
DirPickup
