Using the WebUI
57
VSP716A Administrator and Provisioning Manual
User Preferences
On the User Preferences page, you can configure some basic settings for the phone and
set hold reminder and call waiting settings. The User Preferences page is also available to
phone users when they log on to the WebUI.
The user preference settings are also available as parameters in the configuration file. See
“user_pref Module: User Preference Settings” on page 163
General User Settings
Click the link for each setting to see the matching configuration file parameter in
“Configuration File Parameter Guide” on page 124
. Default values and ranges are listed
there.
Setting
Description
Sets the language that appears on the WebUI.
Sets the language that appears on the phone. Other
languages may be added in a future release.
Sets how long (in seconds) the screen backlight stays on
after the last button press.
Ringer Volume
Sets the ringer volume for incoming calls. You can also use
the VOLUME
or
keys on the VSP716A.
Sets how calls are answered when users press a line key
or
.
Answer
