Using the WebUI
63
VSP716A Administrator and Provisioning Manual
Programmable Hard Keys
You can assign additional functions to the keys that are listed on the Programmable Hard
Keys page. The functions that you assign to hard keys apply to each key in idle mode only.
Programmable Key Type
Description
Configures the key to access the Directory menu. Users
can then press the key to view the Directory menu.
Configures the key to access the Call History list. Users
can then press the key to view the Call History list.
Configures the key to access the Redial list. Users can
then press the key to view the Redial list.
Configures the key to access the Message menu. Users
can then press the key to view the Message menu.
Configures the key to turn Do Not Disturb on or off. The key
is lit orange when DND is on.
Configures the key to turn Call Forward All on or off. In the
Account column, select the account for which Call Forward
All will apply. Before assigning the key, ensure that you
configure Call Forward settings on the Call Settings page.
Configures the key to turn Call Forward Busy on or off. In
the Account column, select the account for which Call
Forward Busy will apply. Before assigning the key, ensure
that you configure Call Forward settings on the Call
Settings page.
Configures the key to turn Call Forward No Answer on or
off. In the Account column, select the account for which
Call Forward No Answer will apply. Before assigning the
key, ensure that you configure Call Forward settings on the
Call Settings page.
Enables the user to retrieve a parked call. Pressing the key
dials the Parked Call Retrieval feature access code (FAC)
configured on the SIP Account Management page.
For some service providers, you must also enter a park
retrieval extension in the Value column. This value will be
dialled along with the Parked Call Retrieval FAC.
