Using the WebUI
67
VSP716A Administrator and Provisioning Manual
Speed Dial Keys
Click the link for each setting to see the matching configuration file parameter in
“speed_dial Module: Speed Dial Settings” on page 175
.
Ringer Settings
The Ringer Settings enable you to provide a distinctive ringing feature via the custom
Alert-Info header associated with an incoming call. This setting overrides the ringer tone
you have set for the account. For example, you can set a unique ringer tone to alert the
VSP716A user upon receiving any incoming calls tagged as "important" in the Alert-Info
header.
The SIP Invite message contains an Alert-Info header that the phone checks in order to
determine which ringer tone to play. The Alert-Info header format is as follows:
Alert-Info: info=info_text
If the header contains the "info" parameter, the phone attempts to match it to the Distinctive
Ringing Text. If there is a match, the associated tone will play. If there is no match, the
default tone for the account will play.
The matching is done on a "first match" basis. In the case of duplicate text strings, the ringer
tone associated with the first matched entry in the Distinctive Ringing Text list will play.
The server-side configuration must be done with your service provider. The SIP Invite text
("Distinctive Ringing Text" on the Ringer WebUI page) must be entered in the format
ringerx
, where x is the ringer number from 1 to 10. For example, to match Ringer 1 enter
ringer1
.
The ringer settings are also available as parameters in the configuration file. See
“ringersetting Module: Distinctive Ringer Settings” on page 178
.
After entering information on this page, click
to save it.
Setting
Description
The name associated with the speed dial entry.
The phone number that the speed dial key dials when
pressed and held.
The SIP account that the phone will use to dial the number.
