Using the WebUI
68
VSP716A Administrator and Provisioning Manual
Paging Zones
On the Paging Zones page, you can enter the multicast IP addresses that the phone will
monitor. When a page is sent out using this multicast IP address, all phones that are
programmed to monitor that IP address will receive the paging RTP stream and play the
page on their speakerphone. You can also enable the phone to send out multicast pages
using a particular multicast IP address.
You must first set up paging groups (each group consisting of a multicast paging IP address
and assigned User IDs) on your SIP PBX. The VSP716A can monitor a maximum of 10
multicast IP addresses.
Setting
Description
Enter the text that will match the "info" parameter and play
the ringer tone. The Distinctive Ringing Text must be in the
format
ringerx
where x is the ringer tone 1 to 10.
Select the desired ringer from the list.
