Using the WebUI
78
VSP716A Administrator and Provisioning Manual
Advanced Network Settings
PC Port
You can set the availability of the deskset PC port for network connectivity. When the port
is enabled for connectivity, you can set the port to port mirroring, thereby allowing you to
use the port to monitor inbound and outbound network traffic and facilitate troubleshooting.
.
VLAN
You can organise your network and optimise VoIP performance by creating a virtual LAN
for phones and related devices.
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings” on page 139
. Default values and ranges are listed there.
Primary DNS
If Auto Configuration is disabled, enter addresses for the
primary and secondary DNS servers.
Secondary DNS
Setting
Description
Enable or disable the PC port to operate in hub/switch
mode (depending on the Enable PC Port Mirroring setting).
Enable PC Port Mirroring When the PC port is enabled, select Enable PC Port
Mirroring to set the port to operate in hub mode (network
traffic on the WAN port is reflected in the PC port). When Port
Mirroring is not selected, the port operates in switch mode.
Setting
Description