Introducing the VSP726
13
VSP726 Administrator and Provisioning Manual
Programmable Feature Keys
The table below lists the default settings for the programmable feature keys (PFKs). The
key assignments on your phone may be different. Some keys may be programmed as
Quick Dial keys, for example. You can assign functions to programmable keys using the
phone menu (
Main Menu > User Settings > Programmable keys
), using the WebUI, or
via provisioning and the configuration file.
For more information about assigning functions to programmable keys using the phone
menu, see the User Guide.
To assign functions to programmable keys using the WebUI, see
.
For the programmable key configuration file parameters, see
Feature Key Settings” on page 190
.
* You can assign more than one key to an account. For example, you can configure Line
keys 1 and 2 to access Account 1, and Line keys 3 and 4 to access Account 2. Use the key
label card to label the keys appropriately for VSP726 users after configuration.
Table 2. Programmable key default settings
Key Number Setting
1
Line—Account 1*
2
Line—Account 1
3
Line—Account 1
4
Directory
5
Call History
6
Redial
7
Messages
8
Do Not Disturb
9
Call Forward All
10
None
11
None
12
None
13–24
None
