2
Registering an Additional Handset
The
FS2605A additional handset must be registered to the FS2615A/FS2615-2A/FS2615-3A telephone base before
use. When first purchased, each expansion handset displays
REGISTER. The new handset should be charged
without interruption for at least 30 minutes before registering it to the telephone base. To register the additional
handset to your
FS2615A/FS2615-2A/FS2615-3A, follow the instructions below.
To register a handset:
Press and hold on the base station for about five
seconds, until the base station LED light flashes. The
base station is entered into registration mode.
Press
and
p q
to select
REGISTRATION
.
Press
and you are requested to enter the 4-digit
system PIN (default:
0000
).
Enter the 4-digit system PIN and press
to confirm.
NOTES
If the handset registration is successful, the handset will
automatically be allocated the next available handset
number. This handset number is shown in the handset
display in standby mode. If the handset registration is
unsuccessful, the
will still flash.
If the handset registration is not successful, the handset
will beep twice and return to idle mode, and then show
REGISTER
again.
1.
2.
3.
4.
•
•
If you have any difficulty with the operations of FS2605A handset or FS2615A/FS2615-2A/FS2615-3A base
station, refer to your FS2615A/FS2615-2A/FS2615-3A User’s manual.
For technical support, please call VTech Technical Inquiry Hotline.
© 207 VTech Telecommunications Ltd. All Rights Reserved. 02/7. V.0.
