background image

7

•  The battery is recyclable, please follow your local recycling regulations.
•  This toy is only to be connected to equipment bearing either of the 

following symbols: 

 or 

Avoid use in the following conditions:

•  Extreme high or low temperatures during use, storage or transportation.
•  Low air pressure at high altitude.
•  Disposal of the product into fire or a hot oven, or mechanically crushing 

or cutting the battery, which can result in an explosion.

•  Extremely high temperature and/or extremely low air pressure that can 

result in an explosion or the leakage of flammable liquid or gas.

The applied nameplate is located at the bottom of the product.

Important safeguards

Before use, please read this instruction carefully and use the adaptor 

strictly according to the instruction:
1.  The output power taken from the supply must not exceed the rating 

given on the power supply.

2. The appliance is not intended to be repaired by service personnel in 

case of failure or component defect (unit can be thrown away).

3. The external flexible cable or cord of this power supply cannot 

be replaced; If the cord is damaged, the power supply should be 

scrapped.

4. The disconnection from line voltage is made by pulling the mains 

plug.

5. The socket-outlet shall be installed near the equipment and shall be 

easily accessible.

6. For indoor use only.
7. Instructions to parents: Transformers and power supplies for toys 

are not intended to be used as toys, and the use of these products 

by children shall be under the full supervision of parents.

The following is an explanation of the symbols on the transformer:

short-circuit-proof safety isolating transformer

Class II equipment

For Indoor Use Only

Switch mode power supply unit

Transformers for toys
(non-inherently short-circuit-proof transformers)

S

Summary of Contents for KidiCom Advance 3.0

















Reviews: