27
27
27
To Insert the Camera into the Waterproof Case
1. Be sure to inspect the O-ring (refer to the later section for details
about inspecting the O-ring) and check for water leaks before
inserting the camera.
2.
To avoid water leaking, if you have
attached a wrist strap to the camera,
you must detach it before inserting the
camera into the case.
3. Open the case cover by pulling the buckle handle outwards. After the
handle is loosened, the buckle can be opened.
4. When the waterproof case is open, insert the camera, taking note of
the position of the buttons. As a point of reference, the
Micro-USB
Port
will be on the same side as the buckle on the waterproof case.
5. Close the case cover and the buckle to hold the cover in position.
Push the buckle handle towards the case body to tighten the buckle.
