25
Answer:
There is no separate driver needed for the
Kidizoom
®
Smartwatch
DX.
It uses a standard USB mass storage device driver. Such a driver
comes standard on all Windows
®
operating systems starting with
Windows
®
2000 Service Pack 3 (to Windows
®
10 and upwards) and
Mac OS
®
9.0 or above. If your computer meets these OS requirements
and is still looking for a driver, please contact your PC manufacturer
for further assistance. For earlier operating systems that do not support
mass storage, a system upgrade or mass storage device driver may be
available. Again, please check with your PC manufacturer.
Question 2:
What is the ISO value (light sensitivity) of the
Kidizoom
®
Smartwatch
DX
?
Answer:
The
Kidizoom
®
Smartwatch DX
uses an auto-ISO value. It auto
adjusts the exposure time and light sensitivity depending on the lighting
environment.
Question 3:
Why won't my
Kidizoom
®
Smartwatch DX
turn on?
Answer:
Please make sure the MASTER POWER SWITCH is ON and the battery
is charged.
Question 4:
Why are my pictures sometimes grainy and fuzzy? Is there anything I
can do to improve the picture quality?
Answer:
In a poorly lit environment, the frame rate (shutter speed) drops to allow
for a longer exposure time. The downside of this is that any movement
in the frame, or of the hand holding the camera, can result in greater
blur. Furthermore, the camera sensor will soften the edges in low light
to counteract the darkness by reducing the image noise. This too can
sometimes result in a blurred picture. Try to improve the lighting to get
better results.
Question 5:
Why are the videos grainy and fuzzy when viewing on the computer
screen?
FREQUEN
TL
Y A
SKED
QUES
TIONS
