83
7.4.2 Commands
(Restart) Begin a new game.
(Level) Set the skill level.
7.4.3 Playing Pegged
1. Select
(Pegged) from the
Entertainment folder.
2. Use the Directional Pad to select
a peg, and press OK. The
selected peg will appear gray.
3. To select another peg, place the
cursor over a new peg, then
press OK.
4. Use the Directional Pad to select a space to place the peg.
•
A peg can only jump one peg at a time.
•
A peg can only jump adjacent pegs.
•
A peg must land in an open space directly on the other
side of the jumped peg.
•
Only horizontal and vertical jumps are allowed- you
cannot jump pegs diagonally.
5. Keep jumping pegs until there is only one peg left on
the board, or until no other moves can be made.
6. Press Cancel to quit the game at any time.
7. Select Restart from the Action menu to start over, or select
Level to select a new puzzle.
397 I/M (78,114)a
6/8/00, 12:32 AM
83
