7
4. To assemble the walker mode,
insert the walker legs into the slots
on the outer edge on the bottom of
the activity panel. The thicker part
of the wheels should be facing out.
Insert and tighten the two big plastic
screws to secure the legs. Check the
legs to make sure they are attached
securely. To remove the walker legs,
loosen the big plastic screws and
remove the legs.
Please check the
screws periodically to ensure they
are attached securely.
5. To assemble the ride-on mode, you
need to criss-cross the left leg over
the right leg until you hear the legs
click together. Insert the ride-on legs
into the middle slots on the bottom of
the activity panel. Insert and tighten
the two big plastic screws to secure
the legs. Check the legs to make
sure they are attached securely. To
remove the ride-on legs, loosen the
two plastic screws and remove the
legs. Slide the lock on the underside
by the back wheels to separate the
criss-crossed legs. Please check the
screws periodically to ensure they are
attached securely.
WaRning:
not to be used by children over 36 months.
Insufficient strength. 42 pounds Max.
Assembly Instructions
Summary of Contents for Sit, Stand & Ride Baby Walker
Page 13: ......