background image

and the telephone company is required to inform you of your right to file a complaint
with the FCC. Your telephone company may make changes in its facilities, equipment,
operation, or procedures that could affect the proper functioning of this product. The
telephone company is required to notify you if such changes are planned.

5. Hearing aid compatibility
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

6. Programming/testing of emergency numbers
If this product has memory dialing locations, you may choose to store police, fire
department and emergency medical service telephone numbers in these locations. If
you do, please keep three things in mind:
a. We recommend that you also write the telephone number on the directory card,

so that you can still dial the emergency number manually if the memory dialing feature
doesn’t work.

b. This feature is provided only as a convenience, and the manufacturer assumes

no responsibility for customer reliance upon the memory feature.

c. Testing the emergency telephone numbers you have stored is not recommended.

However, if you do make a call to an emergency number:
• You must remain on the line and briefly explain the reason for the call before hanging

up.

• Programming/testing of emergency numbers should be performed during off-peak

hours, such as in the early morning or late evening, when the emergency services
tend to be less busy.

IC (Industry Canada)

This telephone is registered for use in Canada.

Notice :
The REN assigned to this device denotes the number of devices you may connect
to the telephone loop which is used by the device to prevent overloading The
termination on a loop may consist of any combination of devices subjected only to
the requirement that the sum of the REN does not exceed five (5.0)

Notice :
The Industry Canada label identifies certified equipment.  This certification means that
the equipment meets certain telecommunications network protective, operational and
safety requirements. The Department does not guarantee the equipment will operate
to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company.  The equipment
must also be installed using an acceptable method of connection. The customer should
be aware that compliance with the above conditions may not prevent degradation
of services in some situations.

FCC, ACTA and IC Regulations

Additional Information

22

Summary of Contents for T2418 - 2.4 GHz Analog Cordless Phone




























Reviews: