14
Basic Operation
1:
1
2:
A B C 2
3:
D E F 3
4:
G H I 4
5:
J K L 5
6:
M N O 6
7:
P Q R S 7
8:
T U V 8
9:
W X Y Z 9
0:
0
*
*
#:
& ’ , - . #
You can store up to 9 telephone numbers with names (up to 15 characters, 24 digits
each location) you dial frequently into the Speed dial memory locations you assign (1
though 9) in the Handset.
You can also store telephone numbers with names alphabetically in the directory. See
Telephone Directory
for instructions.
NOTES:
1. The entries you store in Speed dial memory will be marked with 01 through
09 and also display in the directory.
2. Press
OFF
at any time to exit speed dial mode.
Store a Number/Name in Memory
1. Press
PROG
. Then press or until the screen displays
SPEED DIAL
.
2. Press
SEL
. The screen displays
ENTER 1-9
.
NOTE
: When memory is full, the screen displays
MEMORY FULL
, an error tone
sounds, and you will not be able to store a new record until you delete a
stored record the speed dial memory or telephone directory.
3. Press the key (1 through 9) to assign the memory location for your entry. The
screen displays
ENTER NAME
.
NOTE:
If the location is not empty, your new entry will be stored in place of the old
and will delete the former entry. Take caution to not save over entries you do not
wish to delete from memory.
4. Using the chart below, enter up to 15 characters for the name you’re storing.
Use to backspace and make corrections; use to add a space.
Speed Dial
5. When you finish entering the name, press
SEL
or
PROG.
The screen dis-
plays
ENTER NUMBER
.
6. Enter the telephone number. Use to backspace and make corrections.
Press
REDIAL/PAUSE
to enter a pause if necessary.
Presses
Dial Key 1 2 3 4 5 6
