17
To review the calls, simply press the
and keys to scroll through the Caller ID
memor y. The key moves backward
through the list, while the key
moves
forward. When you reach the end of the call
log,the message “END OF RCV” is displayed.
You can also roll-over from the end of the call
log to the beginning by pressing the
scroll key on additional time.
Repeat Counter
If you receive more than one call from the
same number, the VT9121 tracks these as
repeat calls, and activates the repeat counter.
When you review individual Caller ID records
and the RPT# icon is on, then the current
number being displayed was repeated. The
digit below the RPT# icon indicates the num-
ber if times this number was repeated. Also,
the Time / Date information displayed for this
record will be for the most recent call received
from this number.
Deleting Caller ID Memory
While in Caller ID review mode, the calling
party’s name and telephone number are dis-
played on the LCD. If you wish to delete an
individual call from Caller ID memory, press
the DEL key twice within 1.5 seconds. This
will delete a single entry only.
If you want to delete the entire Caller ID
memory, press and hold the DEL key for 6
seconds.
Manual Reset
Should you encounter any difficulties,
you can perform manual reset. Just press
and hold these 3 keys ( DEL, and )
continuously for 6 seconds. The unit will
be reset to initial setup state.Also ,if there
is a POWER failure for a long period of
time,the unit will also reset to initial
set up state.
In both cases, all previous CID information
will be erased.
CALLER ID
