7
HANDSET FEATURES
PGM KEY
* Press PGM key to enter PROGRAM mode.
See Programming Speed Dial Numbers
for more details.
REDIAL KEY
* When you hear the dial tone, pressing the
REDIAL key will dial out the last number
that was called on your phone.
* It can also be used to store the last number
dialed into the speed dial memory. See
Storing a Redial Number into Speed Dial
for details.
TONE/ * KEY
* In PULSE dialing mode, this key is used
to switch to Temporary TONE dialing mode.
VOLUME SWITCH
* Upper position of switch is high volume
level.
* Middle position is medium volume level.
* Lower position is low volume level.
IN USE/LOW BATT LED
* The IN USE/LOW BATT LED lights when
the phone line is being used by the
handset.
* It flashes in cadence with an incoming ring.
* It flashes quickly during PGM mode.
* It flashes slowly when a low battery is
detected.
PHONE KEY/ FLASH KEY
* Press the PHONE key to make a call.
* If you are currently on a call, pressing
PHONE flashes the line. This would be
used with a feature like call waiting to
answer your second call.
CHAN KEY
* Pressing the CHAN key when the handset
is in use will activate a channel change to
the next free channel.
* This is used if you are experiencing noise
or interference on the current channel.
OFF KEY
* Press the OFF key to exit all modes of
operation.
MEM KEY
* Press the MEM key to enter MEMORY
mode.
* The sequence for dialing out a speed dial
number in memory is: PHONE, MEM,
Number Button (0-9).
