30
Phone settings
5. Press
OK
to enter the date information continuously. The date entered will be in the format you set in Section 8.1.1.
6. Press
OK
to confirm.
Note:
1. If time has been set before, the current time will display, otherwise, "HH:MM" will display.
2. If date has been set before, the current date will display, otherwise, "DD-MM-YY" will display.
8.2
Alarm Settings
You can use this phone to set an alarm clock. When an alarm is set, the
displays on the LCD. When the alarm time is reached, the
and
"ALARM ON" flash on the LCD ringing with the alarm melody for a duration of 45 seconds. You can press any key to disable the alarm.
If snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes.
Note:
1. Key press is still applicable if handset keypad is locked and when the alarm time is reached.
2. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still
sounds at VOLUME 1 level.
3. During an external call or internal call, if an alarm is set and when the alarm time is reached, the
and "ALARM ON" will still flash.
An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user press any key or press and hold
O
to disable the alarm, it will revert to the call duration screen.
4. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is enabled, the alarm will
sound again at the end of the snooze period provided that it's not ringing or in paging mode at the end of the snooze period.
8.2.1
Turn on/off the Alarm
1. Press
and
U
/
D
to select HS SETTINGS.
2. Press
OK
and
U
/
D
to select ALARM.
3. Press
OK
and
U
/
D
to select ON/OFF.
4. Press
OK
to confirm.
Note:
If ON is selected, you will be asked to set the alarm time.
