VTech Xtra Pro, User Manual

B

AT

TE

RY I

N

S

TALL

ATI

O

N

3

Unlock the packaging locks:

1. Rotate the packaging locks 90 degrees anti-clockwise

2. Pull out the packaging lock

Demo strip removal:

When the product is taken out of the packaging, please remove the demo strip from the 
unit to activate normal play mode.

GETTING STARTED

POWER SOURCE

The 

VTech

® 

Xtra

Pro  Laptop

  operates  on  4  “AA”  size  batteries  (AM-3/LR6)  and  1 

“CR2032” size battery, or a 

VTech

®

 7.5V 400mA or 9V 300mA adaptor (sold separately).

BATTERY INSTALLATION

NOTE: 

  For best performance, remove all factory-installed batteries 

and use new, alkaline batteries.
1.  Make sure the unit is turned 

OFF

.

2.   Locate the battery cover on the bottom of the unit and open it.
3.   Insert 4 new “AA” batteries (AM-3/LR6) as illustrated.
4.   Close the battery cover.

IMPORTANT: 

When replacing the 4 “AA” size batteries, make sure the backup battery is 

in the unit. Otherwise you will lose any information stored in the unit.

BACKUP BATTERY INSTALLATION

Your 

VTech

®  

Xtra

Pro Laptop

 comes with a backup battery already installed. To avoid damage 

to the unit from leaky batteries, replace the backup battery at least once a year.

TO REPLACE THE BACKUP BATTERY

1.   Make sure the unit is 

OFF

.

2.   Using a small cross-head screwdriver, loosen the battery cover.
3.   Insert 1 CR2032 size battery as illustrated.
4.   Close the battery cover and tighten the screw to secure it.

IMPORTANT: 

While replacing the backup battery, the 4 “AA” size batteries must be kept in 

the unit. Otherwise, you will lose any information stored in the unit.

BATTERY NOTICE

•  The use of new alkaline batteries is recommended for maximum performance.
•  Non-rechargeable batteries are not to be recharged.
•  Rechargeable  batteries  are  to  be  removed  from  the  toy  before  being  charged  (if 

removable).

•  Rechargeable batteries are only to be charged under adult supervision (if removable).