B) Hardware Overview
4G External
Antenna Ports
Connect 4G external antennas if needed
SIM Card Slot
Insert SIM/USIM card. Push-push type
Power Switch
Switch on/off the router
Signal Strength
LED/WPS/Reset
Button
Short Press (1 second): Enable signal strength indication
Press for 3 seconds (<10 seconds): Activate WPS
Long Press (>10 seconds): Restore to factory default settings
LAN Port
Connect a LAN device as needed
RJ11 Port
Connect an analog phone
Power Receptor Receptor for the Power Adaptor
Network
Status LED
Blue - 4G LTE
Red - No signal, SIM error, Service failure (no IP)
Power LED
Solid when power is on ; Flashing when FW is being updated
Wi-Fi LED
Solid when Wi-Fi is on ; Flashing during Wi-Fi data transmission
WPS LED
Flashing when WPS is in use
SMS LED
Solid when there is unread SMS
Voice LED
Solid when VoLTE/VoIP is ready to make/receive call
Flashing when VoIP is in use
Signal Strength
Bars Reading
Short press on Signal Strength LED/WPS/Reset button to read
current signal strength
Strong signal : 5 LEDs
Weak signal : 1 LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3