4
6.
Connect the power adapter to the router, as depicted below. Plug
the power adapter into an outlet.
7.
There is a power switch located on the back of your router. Slide
the power switch to ON. A light on the front of the unit should turn
on, and an animation on the side of the unit will begin to play as the
router starts up.
8.
If both the signal strength icon (far left) and LTE access (second
from left) icons are displayed, your new router is connected to the
Internet. The middle icon indicates the Wi-Fi network is broadcasting.
You can now access the Internet by connecting your devices to the
router via Wi-Fi or the included Ethernet cable. If the signal strength
and LTE access icons are not displayed five minutes after the device
has been turned on, consult the troubleshooting tips at the end of
this guide.
Switch to ON
Switch to ON
Summary of Contents for Bandluxe R529
Page 1: ......
