8
5.
To change the password, scroll down
the page until you find the section labe
-
led “Pre-shared Setting”. Find the field
labeled “WPAPSK”. The default password
is the last 8 digits of the MAC address you may have previously used
to connect to the network. Enter your desired password, which must
consist of at least 8 numbers and letters. To protect your security
and privacy, we recommend choosing a password that contains both
numbers and letters.
6.
Click “Save Settings”, which can be found at the bottom of the page,
and wait for the changes to be applied. You will temporarily be dis-
connected from the Internet. Once the settings are saved, reconnect
to the router. If you changed the name and password of your wire-
less network, find the new name in the list of networks and connect
using your new password.
9.
In the “Network security key” field, en
-
ter your new password and click OK. OR,
if you changed your security settings to
“Open Network”, change “Security Type”
to “No authentication (Open)”. You should
then be able to reconnect to the device.
7.
If you changed ONLY the password of your
network, and are attempting to reconnect from
a Windows computer, you will need to change
the saved password stored on your computer
by following steps 8 and 9.
8.
In the list of wireless networks, right click
VTel Wireless (or the new name you’ve given
your network) and click properties.
Summary of Contents for Bandluxe R529
Page 1: ......