5. MCU call control and display control
*These are the default recommended settings
Layout:
(experiment with these settings while in a
test call with three to five endpoints)
Auto
- MCU presents participant pictures
(recommended mode)
2X2
- Pictures are in four equal quadrants
5+1
- One large pane surrounded by smaller
panes
Answer Mode
:
Accept All
- any incoming call accepted
Manual*
- Calls must be manually answered
from the MCU itself
Reject All
- No incoming calls are accepted
Highlight Designated Speaker -
there is a yellow
box around the speaker’s window
Names Overlay -
Displays the remote site’s name
*Calls cannot be manually answered from the web interface,
you must have a display attached to the MCU and use its
remote control to accept the call!
You can manually dial out to remote sites
or you can have them dial into the MCU
