VTI Instruments
10
EMX-75XX Introduction
S
TORAGE AND
S
HIPMENT
S
TORING
I
NSTRUMENTS
Store the module in a clean, dry, and static-free environment. For other requirements, see storage
and transport restrictions in
Specification
.
T
RANSPORTING
I
NSTRUMENTS
Package the module using the original factory packaging or packaging identical to the factory
packaging. Containers and materials identical to those used in factory packaging are available
through VTI Instruments offices. If returning the module to VTI Instruments for service, contact a
VTI Service Center to set up an RMA. The following information will be required:
•
Serial number
•
Model number
•
Type of service required
•
Return address
•
If applicable, a description of the problem that is being encountered which provides specific
detail relating the instrument being returned.
In any correspondence, refer to the serial number and RMA number. Mark the container
“FRAGILE” to ensure careful handling. If it is necessary to package the module in a container
other than the original packaging, observe the following (although use of other packaging material
is not recommended):
1.
Wrap the module in heavy paper or anti-static plastic
2.
Protect the front panel with cardboard
3.
Use a double-wall carton made of at least 350 lbs test material
4.
Cushion the module to prevent damage
CAUTION
Do not use styrene pellets in any shape as packing material for the module. The pellets do not
adequately cushion the module and do not prevent the module from shifting in the carton. In
addition, the pellets create static electricity that can damage electronic components.
O
RDERING
I
NFORMATION
Model
Configuration
EMX-7510
64-CH DIO, Source/Sink, 60 V max Static I/O
EMX-7511
64-CH, DIO TTL, Static I/O
EMX-7512
64-CH, DIO LV TTL, Static I/O
EMX-7513
32DI/32DO, Source/Sink, 60 V max, Isolated Static I/O
EMX-7514
64 DO, Source/Sink, 60 V max, Isolated Static
EMX-7515
64 DI, 60 V max, Isolated Static
EMX-7519
64-CH DO, Source/Sink, 60 V max Static
