SCA3000 DEMO KIT
User Manual
9.2
Duplicate serial COM port numbers
Some PCs assign duplicate COM port numbers for virtual com port devices. If the PC assigns a
com port number for demo kit that is already reserved by another device, the demo kit will not work
properly (see
Figure 19
).
COM port numbers can be seen from Computer Management (Device Manager), see section 9.1
for instructions on opening the Device Manager.
PC installs the
demo kit on
same COM port
number as
another device
After changing
the demo to
another USB port
(different slot),
there are no
duplicate COM
port numbers
Figure 19. PC has assigned duplicate COM port numbers for two devices (LEFT), after
changing the USB port there are no duplicate COM port numbers (RIGHT).
VTI Technologies Oy
20/21
www.vti.fi Doc.Nr.
8288400.02 Rev.0.2
electronic components distributor
