User Manual Digicom3100SP Multi-screen Processor
3
SD signal acquisition board supports CVBS and S_VIDEO signal input.
The input HDMI signal can meet HDMI1.3A standard and HDCP protection protocol.
DP signal acquisition board supports DisplayPort
（
DP 1.1a
）
signal input.
SDI signal acquisition board supports SDI signal input.
IP signal acquisition board supports IP signal input.
System supports DVI optical signal input with the resolution of 1920×1080@60Hz (a DVI to
optical-fiber transmitter is required at the signal source end).
System ultra-HD signal acquisition board supports ultra-high resolution signal input with
maximum resolution up to 4K×2K.
The desktop signal processing board supports the desktop signal with adaptive ultra high
resolution.
System supports cascade signal inputs..
All of the input signals can be echoed via network.
Signal output
System supports DVI digital signal (the resolution is up to 1920×1200@60) outputs onto the
screen wall.
System supports DVI optical signal outputs with maximum resolution of 1920×1080@60Hz
(a DVI to optical-fiber receiver is required at the display output end).
Upgrade online
The software and logic can be upgraded online. There is no need to shut down the processor.
System clock synchronization
System main control board supports both inside and outside synchronization.
Signal acquisition board supports both inside and outside synchronization.
Signal processing board supports both inside and outside synchronization.
