User Manual Digicom3100SP Multi-screen Processor
39
3. Installation
Precautions
1)
The on-site installation should be performed by qualified technical engineers. Please
consult VTRON or agent before installing to get technical guidance. To ensure the safety
of the device and installers, at least two technicians are required to complete the
installation.
2)
Digicom Ark 3100SP Multi-screen Processor is delivered as a complete device. All the
hardware installation procedures of the Multi-screen signal processor have been
completed according to the production process strictly in the factory, and had passed the
high temperature and aging test. The user only needs to connect the Multi-screen signal
processor to peripheral equipment.
3)
Before installing the Multi-screen signal processor, please check whether the
environment complies with the requirement of Multi-screen signal processor on working
environment (e.g. temperature, RH, power supply, grounding system, etc.), so as to
ensure that the device can be used normally after installing and also ensure the service
life of the device.
4)
Please use the provided cables (including signal cable, network cable, power cord, etc.).
If it is necessary to use other cables, please consult VTRON or agent before installing to
get technical guidance.
Main cables include:
Video signal cable Signal cascade cable Power cable