User Manual Digicom3100SP Multi-screen Processor
42
3.2 Installing the Cabinet
Digicom Ark 3100SP Multi-screen Processor is in standard modular design, making it has high
expansibility. With redundant power supply and redundant fan, the system stability and excellent
cooling effect are ensured, and the system performance of the Multi-screen signal processor is also
improved. The independent wiring bracket makes the installation and wiring easier.
Digicom Ark 3300SP Multi-screen Processor can be installed in professional 19” rack mounting
cabinet;
3.2.1 Rack Mounting
In rack mounting mode, the Multi-screen signal processor and other equipment on-site are
installed in the professional cabinet together. The support in the bottom of the chassis should be
removed, and install inlet plate on the bottom and ventilation plate on the top. While installing,
adjust the distance between the installation bar of the cabinet and the front door to 50mm~100mm.
Use the provided dedicated bolts to fix. In rack mounting mode, the handle on front panel of the
chassis can be removed. The outlet cable in the end of the cabinet can be fixed on the wiring
structure of the cabinet, or fixed with the optional Cabling Bracket in the cabinet.
Note:
The cabinet is purchased separately. In this installation mode, the selected cabinet should
comply with IEC 60297. The recommended specification is 600 * nU (height) * 1200 (depth),
where “n” depends on the amount of on-site installation devices. Please consult VTRON or agent
for the purchase of cabinet.
3.2.2 Cabling Bracket
When installing the chassis, you can select the cabling structure of the cabinet or the cabling
bracket designed by VTRON to facilitate the system cabling and future maintenance.
The cabling bracket designed by VTRON is as shown in the following figure:
