User Manual Digicom3100SP Multi-screen Processor
46
3.6 Connecting Power Cord
The power port of Digicom Ark 3100SP Multi-screen Processor is in the lower right corner in the
rear panel of the device, as shown below:
Please use the provided cables to connect the power port of the device and power outlet.
Unqualified power cord will affect the power supply of the equipment and thus disturb the
stability and electrical security of the device. In addition, to ensure the power supply stability of
the Multi-screen signal processor, the power port of the processor should be connected to
separated power outlet (220V10A standard receptacle is recommended) and do not share with
other devices.
3.7 System Grounding
Digicom Ark 3100SP Multi-screen Processor has two grounding points, one is embedded
grounding point of 3-core power cord and the other is shell grounding bolt. To ensure the safety
and stability of the device and safety of operators, please implement proper grounding measures,
i.e. use provided 3-core power cord. In addition, it is necessary to use dedicated grounding
conductor to connect the grounding bolt in the lower right corner on the rear panel to dedicated
grounding system in proper means.
Power outlet
Grounding